pa01s series 1w dc/dc converter, sip-package ds_pa01s_09132012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 80% ? sip package with industry standard pinout ? package dimension: 3.3v&5v & 12v models: 11.5 x6.1 x10.2mm (0.45? x0.24? x0.40?) 24v models,: 11.5 x7.1 x10.2mm (0.45? x0.28? x0.40?) ? isolation voltage 1000vdc ? operating temperature range - 40c to +85c ? lead free ,rohs compliant ? >2 mhours mtbf ? 3 years product warranty the pa01s series are miniature, sip package, isolated 1w dc/dc converters with 1,000vdc isolation. it offers short circuit prot ection and allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are the latest offering from a wor ld leader in power systems technology and manufacturing D delta electronics, inc. model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load load regulation maxcapacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) % (max.) uf % pa01s0303a 3.3 260 6 351 14 74 pa01s0305a 3.3 (2.97 ~ 3.63) 5 200 4 394 35 14 33 77 pa01s0503a 3.3 260 6 238 11 72 pa01s0505a 5 200 4 290 11 69 pa01s0509a 9 110 2 260 8 76 PA01S0512A 12 84 1.5 262 7 77 pa01s0515a 5 (4.5 ~ 5.5) 15 67 1 258 30 6 33 78 pa01s1205a 5 200 4 117 9 71 pa01s1209a 9 110 2 107 5 77 pa01s1212a 12 84 1.5 106 5 79 pa01s1215a 12 (10.8 ~ 13.2) 15 67 1 105 13 4 33 80 pa01s2405a 5 200 4 60 8 70 pa01s2409a 9 110 2 54 5 76 pa01s2412a 12 84 1.5 53 4 79 pa01s2415a 24 (21.6 ~ 26.4) 15 67 1 53 7 4 33 79 input characteristics item model min. typ. max. unit 3.3v input models 2.97 3.3 3.63 5v input models 4.5 5 5.5 12v input models 10.8 12 13.2 input voltage range 24v input models 21.6 24 26.4 3.3v input models -0.7 --- 6 5v input models -0.7 --- 9 12v input models -0.7 --- 18 input surge voltage (1 sec. max.) 24v input models -0.7 --- 30 vdc reverse polarity input current --- --- 0.3 a input filter internal capacitor internal power dissipation all models --- --- 450 mw
ds_pa01s_09132012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc output characteristics item conditions min. typ. max. unit output voltage accuracy --- 1.0 3.0 % line regulation for vin change of 1% --- 1.2 1.5 % load regulation io=20% to 100% see model -list ripple & noise (20mhz) --- 100 150 mv p-p ripple & noise (20mhz) over line, load & temp. --- --- 200 mv p-p ripple & noise (20mhz) --- --- 15 mv rms temperature coefficient --- 0.01 0.02 %/ short circuit protection 0.5 second max. general characteristics item conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1000 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v --- 60 100 pf switching frequency 50 90 110 khz mtbf (calculated) @25 , ground benign 2,000,000 ----- ----- hours recommended outside input fuse 3.3v input models 5v input models 12v input models 24v input models 800ma slow-blow type 500ma slow-blow type 200ma slow-blow type 100ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +90 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260 power derating curve (5v output only) (all other output) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 all dc/dc converters should be externally fused at the front end for protection. 5 specifications are subject to change without notice. p2
ds_pa01s_09132012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc mechanical drawing mechanical dimensions pin connections pin function 1 -vin 2 +vin 3 -vout 4 +vout t: 6.1mm(0.24 inch) for 3.3v&5v&12v input models t: 7.1mm(0.28 inch) for 24v input models ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pins 0.05(0.002) physical outline casesize(3.3v,5v,12v input) : 11.5x6.1x10.2mm (0.45x0.24x0.40 inches) case size(24v input) : 11.5x7.1x10.2mm (0.45x0.28x0.40 inches) case material : non-conductive black plastic (flammability to ul 94v-0 rated) weight(3.3v,5v, 12v input) : 1.3g weight(24v input) : 1.7g part numbering system p a 01 s 03 03 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three (3) years limited warranty.complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p3 0.8 [0 .0 7 ] 3x2.54 [3 x 0 .1 0 ] 0.5 [0.02] 10.2 [0.40] 3.2 [0.13] 1 0 .5 [0 .4 1 ] 0.25 [0.01] 1.8 [0.07] t 0.5 [0 .0 2 ] 0.50 [0 .0 2 ] bottom view 1 1 .5 [0 .4 5 ] 1234
|
